|
| D-Link DWL-2100AP SNMP AES 802.11g 108Mbps Wireless Access Point | 
 enlarge | Brand: D-Link
Category: CE
List Price: $108.99
Buy New: $74.99
You Save: $34.00 (31%)
New (52) Used (3) Refurbished (1) from $51.77
Avg. Customer Rating:  27 reviews
Sales Rank: 6690
Media: Electronics
Autographed: No
Memorabilia: No
Fragile: No
Number Of Items: 1
Batteries Included: No
Modem: None
Shipping Weight (lbs): 1.3
Dimensions (in): 11 x 3 x 8
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: DWL-2100AP
Model: DWL-2100AP
UPC: 790069263958
EAN: 0790069266959
ASIN: B00019EYVG
Availability: Usually ships in 1-2 business days
Condition: Brand New in box!! Fast same or next day shipping.
|
| Features:
| • | Enhanced Security from 802.1x and WPA brings improved encrypted key management and authentification | | • | Supports SNMP v.3 | | • | Five Operating Modes (Access Point, Point-to-Point, Point-to-Multipoint, repeater for range extender, Wireless Client) |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
D-LINK DWL-2100AP - With the AirPlus Xtreme G Wireless Access Point, D-LINK once again raises the bar for wireless performance. The versatile DWL-2100AP access point performs in any of 4 modes: as a Wireless Access Point, as a Point-to-Point Bridge to another Access Point, as a Point-to-Multipoint Wireless Bridge, or as a Wireless Client. Up to 108 Mbps transfer rate Advanced security and management features Supports SNMP v.3 and AES
|
| Customer Reviews: Read 22 more reviews...
 Great performance after a difficult setup (AP Client Mode w/ Switch) March 7, 2008
1 out of 1 found this review helpful
I have a d-link router (DI-624) that I use for my wireless network. I wanted to install this access point on the network, attach a switch, and provide network access for a home-theater pc and an Xbox 360.
modem <-> router ... accesspoint <-> switch <-> pc & xbox
The access point can operate in five different modes. After some trial and error, I finally figured out that it was the "AP Client" mode that I needed from the wireless setup options to gain access to my existing wireless network.
After plugging in the switch and attaching the PC and Xbox to the switch, it was soon obvious that only the PC had connectivity. After much hair pulling, I finally found a post on dslreports.com by one lizi555 that explained a fix. Apparently the latest firmware (beyond 2.10) does not allow for more than one device (MAC address) to connect to the network via the switch.
To fix, telnet to the 2100AP's IP address 192.168.0.50 and enter the following commands -> set matstate 1 then -> reboot
This should set a flag for a variable to the following "MultiEthClient (Yes)!" You can check by establishing another telnet session and entering -> get matstate which will list several variables/values including the one above.
It took some doing, but now everything is flowing sweetly. I hope this helps anyone else that runs in to this problem.
Good product with a little Knowledge & exprience with networking February 27, 2008
I have 3 of these units working with a shared but hidden network and after some work and software upgrades have them set up for a good area network system... They work great once you figure them out... The instructions and on line support are not the greatest for a wireless network novice... Once you understand what you want and what they supply, you can set up a good home or local area wireless network...
Does the job, but... September 14, 2007
0 out of 1 found this review helpful
It (or a combination of it and my wireless router) intereferes with bluetooth. Now if I want to use the bluetooth on my phone, I have to unplug all this stuff ;(. VERY ANNOYING!!! Installation took 3 hours with 2 different reps. D-link customer service is outstanding, by the way. Also, my download speed seems to be limited to 75 kbps on the WAP end. Upload is more than double that, which is wierd. Looks like I need another few hours on the phone with tech support.
Bottom line...works kinda well when you actually get it set up. However, getting it set up can be an exercise in patience. Expensive for the speeds I'm seeing :(
 Flexible and Secure September 3, 2007
3 out of 3 found this review helpful
I have tried several different units (entry level) for bridging and these units were the only ones that allowed me to setup a bridge with WPA2. Lots of options for various types of setups and very stable. The stock ant. provided a good connection, but since these will only be bridging 2 networks, I also grabbed a set of DWL-M60AT Directional Indoor Antenna's to limit my broadcast area and boost my signal strength. I bought a few extra units to use as Access Points and they have good coverage & stability. They are a few bucks more more than some other units on the market, but you get what you pay for!
 D-Link = Bad quality = terrible customer support August 28, 2007
0 out of 2 found this review helpful
Too bad I cannot give d-link 0 stars. Several hours on my own, then 3 hrs with customer's support - level one - from India, then level 2 from US, then supervisors of level 2 - doesn't work. Just bought linksys - setup in 5 minutes, works great. Conclusion - I will never buy d-link again, and wouldn't recommend you either.
|
|
|
Copyright
©
2006 Adminpal LLC | |
