| | Nikon ML-L3 Wireless Remote Control for Nikon D40, D40x, D60 & D80 Digital SLR Cameras |  | Brand: Nikon
Category: Photography
List Price: $23.69
Buy New: $9.99
You Save: $13.70 (58%)
New (33) Used (1) from $9.99
Avg. Customer Rating:  407 reviews
Media: Electronics
Autographed: No
Memorabilia: No
Fragile: No
Batteries Included: No
Shipping Weight (lbs): 0
Dimensions (in): 2.4 x 2.4 x 1.1
MPN: 4730
Model: 4730
UPC: 018208047307
EAN: 0018208047307
ASIN: B00007EDZG
Availability: Usually ships in 1-2 business days
|
| Customer Reviews:
 Very good remote for Nikon DSLR September 19, 2008
1 out of 1 found this review helpful
It works really well with my Nikon D60... i just set-up the D60 with perfect camera angle and i get to be in the picture too.
Revision of Previous Service Comment September 18, 2008
0 out of 1 found this review helpful
Beach Camera did a first rate job of correcting a customer service error by replacing a defective wireless remote with a new one at no additional cost to me.
Thank you Beach Camera and thank you Amazon.com for having a product review system that helps vendors improve their customer service.
 Why didn't they add simple instructions? September 18, 2008
3 out of 4 found this review helpful
USING THE REMOTE
You need to change to quick response mode -
Hold down the self timer button (near shutter release) and spin the command dial until the icon appears in the LCD control panel that looks like a little remote with rays coming out of it.
Be within 16 ft.
You can also make it delay the shutter release (icon that looks like a little remote and a clock) if you want to snap yourself and give 2 seconds to put down the remote. Choose the remote icon with a little clock.
Make sure to return remote setting to OFF - no clock/remote icon in LCD after spinning self-timer button -- to go back to normal shooting.
See page 22-23 in Nikon D50 manual.
You can Velcro shut the case on your camera strap. If they left a hole at the end, you could probably use it without taking out of its little case.
See page 100 for changing the time the camera waits for the remote. What this means is, how long the camera remains in remote mode, before it returns to normal operation.
Go to settings (the pencil) and then go to 20 Remote and set to 5 minutes, whatever. (Pencil icon/20 Remote)
The advantage of keeping to the default of 1 minute is, it will go back to normal operation in 1 minute and you will not have to reset it.
The advantage of increasing to a higher time is, you can fiddle with the remote and not have it resetting in only one minute.
The battery in the remote is a Maxell CR2025 3V coin cell.
The indicator light on the front of the camera lights after the exposure.
Very useful September 16, 2008
4 out of 4 found this review helpful
I use my remote whenever my camera is mounted on its tripod. I set my Nikon D60's remote-on duration for 15 minutes and I choose the remote shutter release setting. Then, I hold the remote a few inches from the shutter release, and the remote works every time.
 In the picture without running! September 15, 2008
2 out of 2 found this review helpful
I'm finally in family photos without having to run from behind the camera! And yes, I've knocked over a camera making that mad dash.
|
|
|
Copyright
©
2006 Adminpal LLC | |
