Customer Reviews:
 Don't buy this June 23, 2008
You get what you pay for, and sometimes not even that!! I was replacing my Atdec flush mount, because I needed to lower the projector about 12 inches, and man is there a difference in engineering! First off the lateral twist adjustment is worthless to unusable. There are 2 inaccessible screws to make this adjustment or you can rotate the ceiling mount plate about 15 degrees. The Ceiling mount is worthless for mounting in a single 2x8 ceiling stud because they designed it with 4 holes that are stupidly 3 inches apart. This wouldn't even work for a double stud! I mounted mine diagonal using only 2 of the holes. There are 4 machine screws to hold the extension to the ceiling plate and four more to hold the projector mount to the extension but only ONE LOUSY SCREW for a friction plate that keeps the whole thing from crashing down!!!! In fact while I was adjusting everything (without the projector thank God), a tightened a screw that changed the shape of the extension and the friction set screw popped loose and the whole assembly hit the floor leaving me wondering how I was going to make sure that didn't happen with my projector. I decided to drill a hole through the two parts of the extension and put a screw through it to prevent the two parts from pulling apart. - Believe it or not there is more but you get the idea.
|
